Types:
DH 96A, DH 96P, DH 96C, DH 96BG, DH 96AV, DH 96WG, DH 96CPM, DH 96CT, DH 96FT |
| Auxiliary Supply | |
| Nominal Values | 115 V ó / or 230 V c.a. / a.c. (-15 % / +20 %) |
| Optionally, D.C. power supply | 9...18, 18...36, 36...72, 90...140 V c.c. / d.c. |
| Frequency range | 45 a / to 65 Hz |
| Burden | 4 VA (without optional card)
7 VA (with optional card) |
| |
| Display | |
| 7 segments .55" high | |
| Red color , high efficiency. | |
| Over range indication: "..." | |
| Decimal point programmable | |
| Digits: DH 96A, P, C, BG, CPM, AV, WG: | 4 digits |
| DH 96CT, FT: | 5 digits |
| Data updating time on disp | |
| DH 96A, WG: | < 1 s |
| DH 96P, DH 96C: | < 500 ms |
| DH 96CT: Chronometer | < 100 ms |
| Pulses counters | < 300 ms |
| DH 96FT: | < 1 s |
| Reading rate | |
| DH-96BG, AV: | 4 Readings/s |
| DH 96CPM, C, P: | 2 Readings/s |
| DH 96A, WG: | 1 Readings/s |
| Isolation | |
| Between input, auxiliary supply and output optional target | |
| Test voltage | 3 kV RMS 50 Hz 1 min |
| Impulse test | 4 kV (1,2 / 50 ms) |
| Case | |
| Material | ABS VO |
| Input | |
| Measurement with microprocessor | |
| Number of conversions per reading | 32 |
| Resolution | |
| DH 96A, WG | 10 Bits |
| DH 96P, DH 96C: | 12 bits sign |
| DH 96CPM, DH 96BG, DH 96AV: | 13 bits |
| Measurement range | 2 - 120% |
| Number of conversions per reading | 32 |
| Accuracy | |
| DH 96A, WG (*): | 0.5 % of readout ± 1 digit |
| DH 96P, DH 96C: | 0.2 % of readout ± 1 digit |
| DH 96CPM, BG, AV | |
| (current measurement): | 0.1 % of readout ± 1 digit |
| (voltage measurement): | 0.1 % of readout ± 1 digit |
| (power measurement): | 0.2 % of readout ± 1 digit |
| (energy): | 0.5 % of readout ± 1 digit |
| Input current (DH 96BG, CPM, BG, AV): | |
| Shunt | 60 mV |
| Process signal (optionally): | 0-10 V, 0-20 mA |
| Input voltage (DH 96BG, CPM, AV): | 99.9 V |
| Permanent overload | 2 Un perman. / 3 Un / 10 s
2 In perman. / 5 In / 5 s |
| Burden (DH 96CPM, BG, AV) | |
| voltage: | 10 k ohm / V VA |
| current: | 0.3 VA |
| DH 96CT and DH 96FT: | |
| Switch Vc | 5 V |
| Rc | 3.9 k ohms |
| Fc | 100 Hz |
| Voltage (Pulses counter in CT): | 10 a / to 600 V c.a. / a.c. |
| Namur proximity switch: Rc | 1 k ohms |
| (Pulses counters in CT) Ioff | < 1 mA c.c. / d.c. |
| Ion | > 2.2 mA c.c. / d.c. |
| Priximity switch NPN and PNP output: Rc | 1 k ohms |
| (Pulse counting in CT) Logical level 0 | < 2.4 V |
| Logical level 1 | > 2.6 V * DH 96WG + WG accuracy 1 % F.S. |